Single row bearings inch
Single row bearings have single raceway grooves in the inner and outer rings that are relatively offset. These bearings can support axial loads in one direction only.
Single row bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls.
Single row bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:
such as Excellent for high speeds;Good radial load capacity;Acceptable axial load capacity in both directions;Have low torque capacity at startup and running speeds;Can operate with low noise
Require little maintenance.
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- HH234049/HH234010 Single row bearings inch
- 28000
- 28137
- L163149/L163110 Single row bearings inch
- LM501300
- LM501349HP
- L555249/L555210 Single row bearings inch
- 28000
- 28150
- 67390/67320 Single row bearings inch
- C3
- 60 mm
- LM451347/LM451310 Single row bearings inch
- 99000
- 99575
- EE80385/80325 Single row bearings inch
- LM814800
- LM814849
- 782/772A Single row bearings inch
- L68100
- L68149P
- 796x/793 Single row bearings inch
- LM501300
- LM501349A
- EE540550/541162 Single row bearings inch
- 514000
- EE514050
- LL639249/LL639210 Single row bearings inch
- 200 mm
- Felt Type
- 898/892 Single row bearings inch
- 100 mm
- 150 mm